Forced readiness monitors

Our partners from Canada, USA and Australia often ask the question: is it possible to give readiness monitors status passed? The fact is that readiness monitors are important when undergoing technical inspection in these countries. Readiness monitors do not affect the technical condition and the car diagnostics procedure in any way, so we decided to develop a unique solution for the forced readiness of monitors for most OBD-II protocols. At present forced readiness monitors are fully supported on:
-Bosch and Siemens control units with Tricore TC17xx processors (Bosch MED17, MEVD17, EDC17 AC Delco E86, etc.).
-Bosch control units with a Motorola MPC5xx processor (Bosch EDC16, AC Delco e35).
-Bosch control units with STM/Infenion ST10 processors.
-Bosch control units with Siemens ?167 processor.
-Bosch control units with AURIX processors TC27x (TC29x) and MPC5777M.
We also continue to develop software with control units with Renesanse SH70xx processors. Our solutions allow to immediately and always make passed all available readiness monitors.

Bosch EDC16 forced readiness monitors
Bosch EDC17 forced readiness monitors
Bosch ME7.2 forced readiness monitors
Siemens SID208-SID209 forced readiness monitors
Siemens SID211 forced readiness monitors

3 thoughts on “Forced readiness monitors”

  1. Yes of course. Your car works with a control unit Bosch EDC17CP05 or Bosch EDC17CP65. We can forced make readines monitors, all monitors will be ready immediately and forever.

    Reply
  2. My brother suggested I may like this web site. He was entirely right.
    This put up truly made my day. You cann’t consider simply how a lot time I had spent
    for this info! Thanks!

    Reply

Leave a Comment

captcha